We provide window pane replacement services in Coconut Creek.
If you need to replace the entire window, that is not a service we provide.
For full window installation, you can contact a local window company in Coconut Creek. Here is a link:
We provide window pane replacement services in Coconut Creek.
If you need to replace the entire window, that is not a service we provide.
For full window installation, you can contact a local window company in Coconut Creek. Here is a link:

If you ever need service and you already have the parts on hand, you’ll usually get a better price.
Normally, when you call for service, you end up paying up to three times the cost of the rollers.
Housing: Stamped steel or die-cast aluminum Wheels: Nylon (quiet) or stainless steel (heavy-duty) Bearings: Sealed ball bearings pressed into wheel Assembly: Riveted or screwed together
Manufacturing:
Material: Extruded aluminum (most common) Process: Aluminum billet → heated → pushed through die → cut to length Finishing: Anodized or powder-coated
Upgrades:
Stainless steel track caps (covers) for worn tracks
Pro insight:
Most “track replacement” jobs are unnecessary → track cover works if base is still straight
Pro insight:
Stainless steel rollers are best for humid/coastal areas Cheap rollers fail due to flat spots + rusted bearings
Types & Manufacturing:
Tempered Glass Heated to ~1200°F → rapidly cooled Creates surface compression → shatters into small pieces Laminated (Impact / Hurricane) Two glass sheets + PVB interlayer Pressed + baked in autoclave Low-E Glass Microscopically thin metallic coating applied Insulated (Dual Pane) Two panes + spacer + gas (argon)
Pro insight:
Florida: laminated (impact) > dual pane Tempered is standard but not hurricane-rated
Here is a manufacturer in Boca Raton, Florida, where you can purchase the parts online and be prepared before we arrive.

This job was in Broward County (Parkland, Florida).
Sometimes you may think the lock on a sliding glass door is broken, or that the door just needs adjustment—but that was not the case here.
The track was damaged, and the door was not moving properly.
In this particular sliding glass door, there was no issue with the lock.
Once we installed a snap-on track cover and replaced the rollers, the sliding glass door was properly aligned and balanced again.
https://sliding-glass-door-repair.com/parkland/track-and-roller-repair

🔗 Sliding Glass Door Repair & Window Glass Replacement – Boca Raton
🚪 Sliding Glass Door Services
Sliding glass door roller replacement Sliding door track repair & track cover installation Door off-track alignment & adjustment Lock & handle repair / replacement Stuck or hard-to-open door repair Sliding glass door tune-up & maintenance Hurricane / impact sliding door repair Broken sliding glass door glass replacement Screen door repair & replacement
🪟 Window Glass & Window Repair Services
Window glass replacement Impact / hurricane window glass replacement Double-pane (insulated) glass replacement Tempered safety glass installation Window balance (spring) repair & replacement Window track & hardware repair Window not opening or closing repair Emergency board-up / temporary glass solutions
📍 Service Area
Serving Boca Raton and nearby areas.
Proudly serving Boca Raton and surrounding areas with fast, reliable mobile service.
💡 Optional Add-On Services
Screen enclosure & patio screen repair Sliding door preventive maintenance (recommended in Florida humidity) Glass upgrade options (Low-E, tinted, privacy glass) Commercial storefront glass repair

Here are some glass manufacturers and suppliers in the Tampa Bay area. You can purchase the glass directly from them, and we will handle the installation for you.
West Coast Glass & Mirrorhttps://westcoastwd.com/
West Coast Window & Door, Inc.
7501 124th Avenue Largo, FL 33773
Binswanger Glass
https://glass-replacement-and-repair-services.cmac.ws/binswanger-glass/237/
6550 W Waters Ave, Tampa, FL, 33602
Architectural Glass Services
Tampa Bay Glass Suppliers:
West Coast Glass & Mirror – Tampa, FL Binswanger Glass – Tampa, FL Architectural Glass Services, Inc. – Tampa, FL Glass Doctor of Tampa Bay – Tampa Bay, FL Custom Glass & Mirror of Tampa Bay – Clearwater, FL Apex Glass & Mirror – St. Petersburg, FL

A deadbolt is a great idea as an additional lock for a sliding glass door. It can be installed either on the top or the bottom of the door.
These locks are very practical and are among the best deadbolt options for sliding doors. There are different types—some use a simple hook, while others use a pin that goes inside the door, which requires drilling a hole. This older pin-style lock is not recommended and was commonly used many years ago.
The extra lock is mainly for added peace of mind and improved child safety. We know that if someone really wants to break the glass, even ten deadbolts won’t stop them—but having one extra lock is still a good safety measure.

There are different types of rollers for sliding glass doors, and not every roller fits every door. If the roller is not compatible, the door will not slide properly—or may not slide at all.”
Why this happens:
The roller may be too large, causing excessive pressure and forcing the frame to spread. The roller may be too small, allowing it to slip or fall out of its housing. The roller may be too weak to support a heavy door, causing dragging or failure. Incorrect wheel material or height can prevent proper alignment with the track.
Using the wrong roller creates stress on the frame and track, which leads to poor performance and premature damage.
For example, hurricane glass—also called laminated glass—has three layers: two sheets of glass bonded together with a thick interlayer in the middle. This construction makes it extremely difficult to break through, even if the outer glass cracks
Regular glass is not up to code because if it breaks and someone passes through it, it can cause serious injury. It shatters into large, sharp pieces. This type of glass is mainly used in windows, where there is a lower chance of someone running into it.
Double-pane glass is mainly designed for cooler climates. It consists of two layers of glass with a spacer in the middle. This design helps insulate the space and maintain indoor temperatures.
If tempered glass breaks, it shatters into many small pieces. Although it may look scary, it is much less likely to cause serious injury compared to regular glass in an accident.
Low-E glass has an extra reflective coating that provides UV protection from the sun and helps keep your home cooler. It can be fabricated for all types of windows.
1.Sliding Glass Door
2. Sliding Glass Door Locks
3. Sliding Glass Door Tracks
4. Sliding Glass Door (Glass Only)
https://www.onedayglass.com/?srsltid=AfmBOoo4nytfy2b4dda5ZCseRwx9vaWoYvsmEN5zrEM2H4r5mMmnYF5a
5. Sliding Glass Door Handles
6. Window Springs (Balance)
7. Window Sash
8. Window Locks
https://www.amazon.com/Best-Sellers-Window-Locks-Latches/zgbs/hi/517830
9. Sliding Glass Doors Rollers
10. Sliding Glass Doggie Door

Fixing glass can be challenging, especially when a window has mullions or columns. In some cases, manufacturers fabricate windows using strong structural adhesives instead of silicone. When this happens, the window frame often needs to be restored after the glass replacement.
To achieve a clean and professional finish, we either apply color-matched silicone that matches the window frame or custom-fabricate window trim to ensure a neat, aesthetically pleasing result.**
Slightly simpler version (more conversational)
**Glass replacement can be difficult, especially on windows with columns or mullions. Some manufacturers use harsh structural glue instead of silicone, which can damage the frame during glass removal. In these cases, the frame must be restored.
We either use color-matched silicone or custom window trim to make sure the final result looks clean and professional.
Here is a local place you can find new columns http://www.alphascreendoorandwindows.com/